Display Removal - Motorola Moto E Service & Repair Manual

1. Place the phone in the Styx Lens Removal
Fixture with the Display facing down and the
Headset Jack facing the front of the fixture.
2. Press down on the Styx Lens Removal Fixture
and press the red button to turn on the vacuum
pump.
3. Hold the Styx Lens Removal Fixture down until
the gauge (circled) reaches -90 kPa. When the
gauge reaches -90 kPa, remove your hand from
the Styx Lens Removal Fixture.
4. Wait for the Styx Lens Removal Fixture to spring
up.
The lid on the Generic Lens Removal Fixture is
spring loaded, and will automatically open when
the Display is separated from the Housing.
5. Press the red button to turn off the vacuum
pump.
6. Turn the vacuum knob (circled) counter-
clockwise to release the vacuum.