Storing A Group Index - Sharp AR-FX7 Operation Manual

STORING A GROUP INDEX

Auto dial keys (rapid keys and group keys) are normally stored in the ABC index. To make auto dial keys more
convenient to use, you can store a group of auto dial keys in a group index and assign a name to that index. When
you switch to the group indexes, USER 1, USER 2, USER 3, USER 4, USER 5, and USER 6 appear. You can
assign any name up to 6 characters long to each of the USER indexes.
The procedure for storing auto dial numbers in a group index is explained on page 67, and the procedure for
switching between the ABC index and the group indexes is explained on page 8.
1
Press the [CUSTOM SETTINGS] key,
and then touch the [ADDRESS
CONTROL] key (see steps 1 and 2 on
page 65).
2
Touch the [CUSTOM INDEX] key.
CUSTOM INDEX
3
Touch an index key ([USER 1] to
[USER 6]).
You can enter a name for the selected index.
CUSTOM SETTINGS
CUSTOM INDEX
SELECT THE KEY TO BE CUSTOM NAMED.
USER 1 USER 2 USER 3
When the index key is touched, the letter entry screen
appears.
CUSTOM INDEX NAME
USER 1
SPACE
78
O
OK
GROUP 4 USER 5 USER 6
CANCEL OK
ABC abc
AB/ab 12#$% ÃÄÂ/ãäâ
4
Enter a maximum of 6 characters for
the index name.
Use the key to clear the displayed name and
then enter the desired name. See page 80 for the
procedure for entering characters.
When finished, touch the [OK] key. The new
name appears in the screen of step 3.
5
If you wish to program another index
name, repeat steps 3 and 4.
6
When finished, touch the [OK] key.
To change a user index name, re-enter the name
as explained in steps 3 and 4.