Appears On A Fax Transmission - Sharp AR-FX7 Operation Manual

SELECTING THE SENDER INFORMATION THAT

APPEARS ON A FAX TRANSMISSION

Follow the steps below to select a sender from among the programmed senders.
This function is convenient when you wish to use a different sender's name for different destinations.
1
In fax mode, touch the [SPECIAL
MODES] key.
AUTO RECEPTION
BO
SUB ADD
SPECIAL MODES ADDRESS
DIRECT TX MEMOR
2
Touch the key and then the [OWN
PASSCODE SELECT] key.
OWN PASSCODE
E
SELECT
3
Touch the desired sender key in the
list.
SENDER LIST
02
SHARP CORPORATION
04
SHARP GROUP
06
XX GROUP
If multiple senders have been programmed
Note
and a sender is not selected, the sender
with the lowest control number is
automatically selected.
4
Touch the [OK] key.
OK
1/2
If the address book
screen appears, touch
the [CONDITION
SETTINGS] key to
display the condition
settings screen. (p.7)
The list of programmed
senders appears.
You will return to the
screen of step 2.
ADVANCED TRANSMISSION METHODS
5
Toch the [OK] key.
You will return to the condition settings screen.
6
Perform the fax transmission. (p.12)
3
45