Faxing A Thin-Sheet Document Using The Rspf - Sharp AR-FX7 Operation Manual

FAXING A THIN-SHEET
DOCUMENT USING THE RSPF
Thin-sheet documents can be faxed using the RSPF.
When the thin-sheet scanning function is used, the RSPF scans the document at a slower speed.
Follow these steps to enable or disable the thin-sheet scanning function.
A document that is extremely thin or which has folds or wrinkles may misfeed in the RSPF. In
Caution
this case, scan the document from the document glass.
1
Touch the [SPECIAL MODES] key in
fax mode.
AUTO RECEPTION
BO
SUB ADD
SPECIAL MODES ADDRESS
DIRECT TX MEMOR
2
Touch the [SLOW SCAN MODE] key.
SLOW SCAN MODE
MEMORY BOX
touch the [SLOW SCAN MODE] key so that the key is
no longer highlighted.
3
Touch the [OK] key.
OK
1/2
SCAN MODE
4
Place the document in the RSPF.
(p.10)
If the address book
screen appears, touch
the [CONDITION
SETTINGS] key to
display the condition
settings screen. (p.7)
The [SLOW SCAN
MODE] key is
highlighted. If the [SLOW
SCAN MODE] key is
already highlighted, the
function has already
been enabled.
To disable the function,
You will return to the
condition settings screen.
5
Fax the document. (p.12)
• The two-sided scanning function cannot
Note
be used.
• When using the thin-sheet scanning
function, the resolution cannot be set to
STANDARD.
• The thin-sheet scanning function can be
enabled permanently. ("SLOW SCAN
MODE" (p.100))
3
39