Beep After Good Decode; Transmit "No Read" Message - Motorola Symbol MiniScan MSXX07 Series Integration Manual

10 - 16 Symbol MiniScan MSXX07 Series Integration Guide

Beep After Good Decode

Scan this symbol to set the scanner to beep after a good decode.
Scan this symbol to set the scanner not to beep after a good decode. The beeper still operates during parameter
menu scanning and indicates error conditions.

Transmit "No Read" Message

Enable this option to transmit "NR" if a 1-D symbol does not decode, and "FR" if a 2-D symbol does not decode.
Any enabled prefix or suffixes are appended around this message.
If you disable this parameter, and a symbol can not be decoded, no message is sent to the host.
*Beep After Good Decode
Do Not Beep After Good Decode
Enable No Read
*Disable No Read