Programmable Raster Height And Raster Expansion Speed - Motorola Symbol MiniScan MSXX07 Series Integration Manual

10 - 14 Symbol MiniScan MSXX07 Series Integration Guide

Programmable Raster Height and Raster Expansion Speed

NOTE Only the Symbol MS2207, MS2207VHD, and MS3207 support these options.
If you enabled Programmable Raster or Always Raster, this parameter selects the laser pattern's height and rate of
expansion. This parameter is intended for very specific applications, and is usually not necessary.
To select the laser pattern's height and/or rate of expansion:
Scan the bar code for either Raster Height or Raster Expansion Speed below.
1.
Scan two numeric bar codes beginning on
2.
between 01 and 15.
To change the selection or to cancel an incorrect entry, scan the
page 10-93 that represent a two-digit value. Valid values are
Raster Height (Default 15)
Raster Expansion Speed (Default 11)
Cancel bar code on page 10-95.