Stop Bit Select; Data Bits - Motorola Symbol MiniScan MSXX07 Series Integration Manual

Stop Bit Select

The stop bit(s) at the end of each transmitted character marks the end of transmission of one character and
prepares the receiving device for the next character in the serial data stream. Select the number of stop bits (one or
two) the host device is programmed to accommodate.

Data Bits

This parameter allows the scanner to interface with devices requiring a 7-bit or 8-bit ASCII protocol.
*
1 Stop Bit
2 Stop Bits
7-Bit
*
8-Bit
RS-232 Interface 11 - 9