MSI Plessey Check Digits
These check digits at the end of the bar code verify the integrity of the data. At least one check digit is required.
Check digits are not automatically transmitted with the data.
If you select two check digits, also select an
Transmit MSI Plessey Check Digit
Scan this symbol to transmit the check digit with the data.
Scan this symbol to transmit data without the check digit.
*One MSI Plessey Check Digit
MSI Plessey Check Digit
Two MSI Plessey Check Digits
Transmit MSI Plessey Check Digit
(Enable)
*Do Not Transmit MSI Plessey Check Digit
(Disable)
Parameter Menus 10 - 67
Algorithm. See
page
10-68.