Set Lengths For Code 39 - Motorola Symbol MiniScan MSXX07 Series Integration Manual

Set Lengths for Code 39

The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for Code 39 to any length, one or two discrete lengths, or lengths within a specific
range. If Code 39 Full ASCII is enabled, Length Within a Range or Any Length are the preferred options.
One Discrete Length - This option limits decodes to only Code 39 symbols containing a selected length. Select
lengths using the Numeric Bar Codes on page
characters, scan Code 39 - One Discrete Length, then scan 1 followed by 4. To change the selection or cancel an
incorrect entry, scan the
Two Discrete Lengths - This option limits decodes to only those Code 39 symbols containing either of two
selected lengths. Select lengths using the
Code 39 symbols containing either 2 or 14 characters, select Code 39 - Two Discrete Lengths, then scan 0, 2,
1, and then 4. To change the selection or cancel an incorrect entry, scan the
Length Within Range - This option limits decodes to only those Code 39 symbols within a specified range.
Select lengths using the
containing between 4 and 12 characters, first scan Code 39 Length Within Range. Then scan 0, 4, 1 and 2
(single digit numbers must always be preceded by a leading zero). To change the selection or cancel an incorrect
entry, scan the Cancel
Any Length - Scan this option to decode Code 39 symbols containing any number of characters.
10-93. For example, to decode only Code 39 symbols with 14
Cancel bar code on page
Code 39 - One Discrete Length
Numeric Bar Codes on page
Code 39 - Two Discrete Lengths
Numeric Bar Codes on page 10-93.
bar code on page 10-95.
*Code 39 - Length Within Range
Code 39 - Any Length
10-95.
10-93. For example, to decode only those
For example, to decode Code 39 symbols
Parameter Menus 10 - 45
Cancel bar code on page 10-95.