Set Lengths For Codabar - Motorola Symbol MiniScan MSXX07 Series Integration Manual

Set Lengths for Codabar

The length of a code refers to the number of characters (i.e., human readable characters) the code contains,
including start or stop characters. Set lengths for Codabar to any length, one or two discrete lengths, or lengths
within a specific range.
One Discrete Length - Select this option to decode only codes containing a selected length. Select lengths using
the Numeric Bar Codes on page
decode only Codabar symbols containing 14 characters. To change the selection or cancel an incorrect entry, scan
the Cancel bar code on
Two Discrete Lengths - Select this option to decode only codes containing two selected lengths. Select lengths
using the Numeric Bar Codes on page
2, 1, 4, to decode only Codabar symbols containing 2 or 14 characters. To change the selection or cancel an
incorrect entry, scan the
Length Within Range - Select this option to decode a code within a specified range. Select lengths using the
Numeric Bar Codes on page
characters, first scan Codabar Length Within Range, then scan 0, 4, 1 and 2 (enter a leading zero for single digit
numbers). To change the selection or cancel an incorrect entry, scan the
Any Length - Scan this option to decode Codabar symbols containing any number of characters.
10-93. For example, select Codabar One Discrete Length, then scan 1, 4, to
page 10-95.
Codabar - One Discrete Length
10-93. For example, select Codabar Two Discrete Lengths, then scan 0,
Cancel bar code on page
Codabar - Two Discrete Lengths
10-93. For example, to decode Codabar symbols containing between 4 and 12
*Codabar - Length Within Range
Codabar - Any Length
10-95.
Cancel
Parameter Menus 10 - 63
bar code on page 10-95.