Beeper And Led Definitions - Motorola Symbol MiniScan MSXX07 Series Integration Manual

Beeper and LED Definitions

Table 3-1 provides standard beeper definitions, and
Standard Beeper Definitions
Table 3-1
Beeper Sequence
Standard Use
1 Beep - short high tone
1 Beep - long high tone
3 Beeps - short high tone
(Symbol MS2207/2207VHD/3207 only)
Parameter Menu Scanning
2 Beeps- short high tone
1 Beep- hi/lo/hi/lo tone
2 Beeps - lo/hi tone
Communication
4 Beeps - short high tone
4 Beeps - hi/hi/hi/lo
3 Beeps - lo/hi/lo
LED Definitions
Table 3-2
LED
Red
Green
Table 3-2
A bar code symbol was decoded (if decode beeper is enabled).
Thermal shutdown.
Power-on or reset. Occurs immediately after the scanner is turned on,
indicating that the system software is working properly. If three beeps
occur during normal operation, it is due to a reset and any work in
progress is lost. If this occurs often, contact Motorola Enterprise
Mobility Support.
Correct entry scanned or correct menu sequence performed.
Successful program exit with change in the parameter setting.
Input error, incorrect bar code, or Cancel scanned, wrong entry,
incorrect bar code programming sequence; remain in program mode.
Communication error.
Receive error.
ADF transmit error.
Indication
Scanner is on.
A bar code was successfully decoded.
provides LED definitions.
Indication
Scanning 3 - 7