Setup Field(S); Send Next 20 Characters - Motorola Symbol MiniScan MSXX07 Series Integration Manual

13 - 28 Symbol MiniScan MSXX07 Series Integration Guide
Send Data (continued)
Send Next 19 Characters

Setup Field(s)

Setup Field(s) Definitions
Table 13-2
Parameter
Move Cursor
Move Cursor To a Character
Move Cursor to Start of Data
Move Cursor Past a Character
Skip Ahead "N" Characters
Skip Back "N" Characters
Send Preset Value
Scan the Move Cursor To Character, then any printable ASCII
character from the Alphanumeric Keyboard on page
moves the cursor to the position after the matching character. If the
character is not there, the rule fails and ADF tries the next rule.
Scan this bar code to move cursor to the beginning of the data.
This action moves the cursor past all sequential occurrences of a
selected character. For example, if the selected character is 'A', then
the cursor moves past 'A', 'AA', 'AAA', etc. Scan the
Character, then select a character from the
on page 13-88. If the character is not there, the cursor does not move
(i.e., has no effect).
Scan one of these bar codes to select the number of positions ahead
to move the cursor.
Scan one of these bar codes to select the number of positions back to
move the cursor.
Send Values 1 through 6 by scanning the appropriate bar code. Set
these values using the prefix/suffix values.
Value 1 = Scan Suffix
Value 2 = Scan Prefix
Values 3-6 are not applicable

Send Next 20 Characters

Description
13-88. This
Move Cursor Past
Alphanumeric Keyboard
Page
13-29
13-29
13-29
13-30
13-31
13-31