Chapter 2 Installation; Introduction; Unpacking; Mounting - Motorola Symbol MiniScan MSXX07 Series Integration Manual

Chapter 2 Installation

Introduction

This chapter provides information on unpacking, mounting, and installing the MiniScan.

Unpacking

Remove the MiniScan from its packing and inspect for damage. If the scanner is damaged, contact Motorola
Enterprise Mobility Support. See
KEEP THE PACKING. It is the approved shipping container and should be used if the equipment needs to be
returned for servicing.

Mounting

There are three mounting holes (threaded inserts) on the bottom of the chassis.
The following figures provide mounting dimensions for the MiniScan scanner housings. For a mounting template,
see Mounting Template on page 14-1.
NOTE Use only non-magnetic M3x.5 screws with a maximum length of 3.6M to mount the MiniScan scanner
chassis.
page xv for contact information.