Download Print this page

Motorola CS3000 Manual: Decode Upc/ean Supplementals

Motorola cs3000 symbol.
Hide thumbs

Advertisement

4 - 8
CS3000 Series Scanner Product Reference Guide

Decode UPC/EAN Supplementals

Parameter # 0x10
Supplementals are bar codes appended according to specific format conventions (e.g., UPC A+2, UPC E+2,
EAN 13+2). The following options are available:
If you select Ignore UPC/EAN Supplementals, and the scanner is presented with a UPC/EAN plus
supplemental symbol, the scanner decodes UPC/EAN and ignores the supplemental characters.
If you select Decode UPC/EAN with Supplementals, the scanner only decodes UPC/EAN symbols with
supplemental characters, and ignores symbols without supplementals.
If you select Autodiscriminate UPC/EAN Supplementals, the scanner decodes UPC/EAN symbols
with supplemental characters immediately. If the symbol does not have a supplemental, the scanner
must decode the bar code the number of times set via
page 4-12
before transmitting its data to confirm that there is no supplemental.
If you select one of the following Supplemental Mode options, the scanner immediately transmits
EAN-13 bar codes starting with that prefix that have supplemental characters. If the symbol does not
have a supplemental, the scanner must decode the bar code the number of times set via
UPC/EAN Supplemental Redundancy on page 4-12
no supplemental. The scanner transmits UPC/EAN bar codes that do not have that prefix immediately.
• Enable 378/379 Supplemental Mode.
• Enable 978/979 Supplemental Mode.
NOTE If you select 978/979 Supplemental Mode and are scanning Bookland EAN bar codes, see
Enable/Disable Bookland EAN on page 4-7
ISBN Format on page
• Enable 977 Supplemental Mode.
• Enable 414/419/434/439 Supplemental Mode.
• Enable 491 Supplemental Mode.
• Enable Smart Supplemental Mode - applies to EAN-13 bar codes starting with any prefix listed
previously.
• Supplemental User-Programmable Type 1 - applies to EAN-13 bar codes starting with a 3-digit
user-defined prefix. Set this 3-digit prefix using
• Supplemental User-Programmable Type 1 and 2 - applies to EAN-13 bar codes starting with either
of two 3-digit user-defined prefixes. Set the 3-digit prefixes using
on page
• Smart Supplemental Plus User-Programmable 1 - applies to EAN-13 bar codes starting with any
prefix listed previously or the user-defined prefix set using
page
4-12.
• Smart Supplemental Plus User-Programmable 1 and 2 - applies to EAN-13 bar codes starting with
any prefix listed previously or one of the two user-defined prefixes set using
Supplementals on page
NOTE To minimize the risk of invalid data transmission, select either to decode or ignore supplemental
characters.
4-19.
4-12.
4-12.
Decode UPC/EAN Supplemental Redundancy on
before transmitting its data to confirm that there is
to enable Bookland EAN, and select a format using
User-Programmable Supplementals on page
User-Programmable Supplementals
User-Programmable Supplementals on
Decode
Bookland
4-12.
User-Programmable

Advertisement

This manual also for:

Cs3070

Comments to this Manuals

Symbols: 0
Latest comments: