Set Lengths For Code 11 - Motorola Symbol MiniScan MSXX07 Series Integration Manual

Set Lengths for Code 11

The length of a code refers to the number of characters (i.e., human readable characters), including check
digit(s) the code contains. Set lengths for Code 11 to any length, one or two discrete lengths, or lengths within a
specific range.
One Discrete Length - Select this option to decode only codes containing a selected length. Select lengths using
the Numeric Bar Codes on page
the decoding to only Code 11 symbols containing 14 characters. To change the selection or cancel an incorrect
entry, scan the Cancel
Two Discrete Lengths - Select this option to decode only codes containing two selected lengths. Select lengths
using the Numeric Bar Codes on page
2, 1, 4, to limit the decoding to only Code 11 symbols containing 2 or 14 characters. To change the selection or
cancel an incorrect entry, scan the
Length Within Range - Select this option to decode only codes within a specified range. Select lengths using
the Numeric Bar Codes on page
characters, first scan Code 11 Length Within Range, then scan 0, 4, 1 and 2 (single digit numbers must always
be preceded by a leading zero). To change the selection or cancel an incorrect entry, scan the
page 10-95.
Any Length - Scan this option to decode Code 11 symbols containing any number of characters.
10-93. For example, select Code 11 One Discrete Length, then scan 1, 4, to limit
bar code on page 10-95.
Code 11 - One Discrete Length
10-93. For example, select Code 11 Two Discrete Lengths, then scan 0,
Cancel bar code on
Code 11 - Two Discrete Lengths
10-93. For example, to decode Code 11 symbols containing between 4 and 12
*Code 11 - Length Within Range
Code 11 - Any Length
page 10-95.
Parameter Menus 10 - 53
Cancel bar code on