Gs1 Databar Expanded; Convert Gs1 Databar To Upc/Ean - Motorola Symbol MiniScan MSXX07 Series Integration Manual

GS1 DataBar Expanded

To enable or disable GS1 DataBar Expanded, scan the appropriate bar code below.

Convert GS1 DataBar to UPC/EAN

NOTE The Symbol MS1207FZY and MS1207WA only support this option.
This parameter only applies to GS1 DataBar-14 and GS1 DataBar Limited symbols not decoded as part of a
Composite symbol. When this conversion is enabled, DataBar-14 and DataBar Limited symbols encoding a single
zero as the first digit have the leading '010' stripped and the bar code reported as EAN-13.
Bar codes beginning with two or more zeros but not six zeros have the leading '0100' stripped and the bar code
reported as UPC-A. The UPC-A Preamble parameter to transmit the system character and country code applies to
converted bar codes. Note that neither the system character nor the check digit can be stripped.
Enable GS1 DataBar Expanded
*Disable GS1 DataBar Expanded
Enable Convert GS1 DataBar to UPC/EAN
*Disable Convert GS1 DataBar to UPC/EAN
Parameter Menus 10 - 73