10 - 10 Symbol MiniScan MSXX07 Series Integration Guide
Laser On Time
This parameter sets the maximum time decode processing continues during a scan attempt. It is programmable in
0.1 second increments from 0.5 to 9.9 seconds.
To set a Laser On Time, scan the bar code below. Next scan two numeric bar codes beginning on
correspond to the desired on time. Include a leading zero for times less than 1.0 second. For example, to set an on
time of 0.5 seconds, scan the bar code below, then scan the 0 and 5 bar codes. To change the selection or to
cancel an incorrect entry, scan the
Scan Angle
NOTE This option is supported by the Symbol MS1207FZY only.
This parameter sets the scan angle to the default or alternate angle.
Cancel
bar code on
page
10-95.
Laser On Time
*Default Angle
Alternate Angle
page 10-93
that