Positioning The Insert - Contura C i31 Installation Instructions Manual

GB
186
INSERT PLACEMENT

Positioning the insert

!
If the protective screen is selected – read these
instructions before installing the insert or chimney.
Position the floor section and check that the minimum permitted
distance to combustible material is kept. Measure to the centre of
the floor section.
The rear edge of the floor section will align with the complete rear
edge of the surround.
1
2
!
The stove can be positioned tight to the
wall behind.
When installing against non-vertical
walls and to facilitate installation it is
recommended that a small gap is left
between the wall and stove. Lay the floor
section a slight distance from the wall
behind, and align the position of the holes
in the ceiling for the chimney lead-in with
the same dimensions.
The cross in the floor panel indicates
the location of the flue gas output.