Wireless 5.8Ghz Variant - Motorola PTP 400 Series User Manual

18.1.3 Wireless 5.8GHz Variant

Radio Technology
RF Band
Channel Selection
Dynamic Frequency
Control
Channel size
Tx power @ Antenna ports
Transmit Power Control
Manual Power Control
Receiver Noise Figure
31
As specified by FCC Part 15.247
Specification
5.725-5.850GHz
By dynamic frequency control and manual intervention
Automatic detection on start-up and continual adaptation to
avoid interference.
Initial capture 10-15 sec. Out of service on interference 100
ms. (+60 seconds when Radar Detection is operational)
11 MHz
Mode
BPSK Mode
QPSK Modes
16QAM Modes
64QAM Modes
Loop bandwidth 1 Hz, Range 30dB typical
Maximum power can be controlled lower than the power
limits shown above in order to control interference to other
users of the band.
Typically 6 dB
196
Maximum Power Output
31
(region dependant)
25 dBm
23 dBm
21 dBm
19 dBm