Figure 52 - Software Upgrade - Step 1 - Motorola PTP 400 Series User Manual

Figure 52 - Software Upgrade – Step 1
The software image will now be uploaded to the unit. This upload should only take a few
seconds. Once complete the image is verified and validated to ensure that no errors occurred
during transfer and the image is valid to run on the current platform. If there are any problems
a warning screen will appear.
The unit being upgraded will now display information about the build it currently has stored in
the image bank and the one that's just been uploaded, as shown in Figure 53. If the image is
not correct, the user has the option to go back and reload a new image, as shown in Figure
52.
109