Wireless Bridging Page - Motorola SURFBOARD SVG2500 User Manual

9 SVG2500 WIRELESS PAGES
Field
Output Power
Beacon Interval
DTIM Interval
Fragmentation Threshold
RTS Threshold

Wireless Bridging Page

This page allows you to configure the WDS features.
Field
Wireless Bridging
Remote Bridges
Description
Auto will provide the best performance in nearly all situations.
Sets the output power as a percentage of the hardware's
maximum capability.
Sets the beacon interval for the AP. The default is 100, which is
fine for nearly all applications.
Sets the wakeup interval for clients in power save mode. When a
client is running in power save mode, lower SVG2500N-2.1.1.0-
LAB-00-SH.bin values provide higher performance but result in
decreased client battery life, while higher values provide lower
performance but result in increased client battery life.
Sets the fragmentation threshold. Packets exceeding this
threshold will be fragmented into packets no larger than the
threshold before packet transmission.
Sets the RTS threshold. Packets exceeding this threshold will
cause the AP to perform an RTS/CTS exchange to reserve the
wireless medium before packet transmission.
Description
Enables or disables wireless bridging.
Table of remote bridge MAC addresses authorized to establish a
wireless bridge. Up to four remote bridges may be connected.
Typically, you will also have to enter your AP's MAC address on the
remote bridge.
102