User Programs (Al-2050/2060); Copy Mode - Sharp AL-2020 Service Manual

Program
Mode
No.
25 Copy effective paper width
setting function (Bypass
tray)
26 Copy effective paper width
setting function (Tray)
28 Selection of copy start
state (Polygon rotation on/
off)
29 Fusing temperature
setting when the bypass
tray is used
* Factory default settings are indicated with an asterisk (*).
5) Press the start ( ) key. The right-hand number in the display
will be steadily lit and the entered value will be stored.
Note: To change the setting or to set another mode, press the
clear key. The unit will return to step 2).
6) Press the light ( ) key to return to the normal copy mode.
A. Copy mode
Program
Program name
number
1 AUTO CLEAR
2 PREHEAT MODE
3 AUTO SHUT-OFF
4 AUTO SHUT-OFF
TIME
7 LAYOUT IN 2IN1
8 OFFSET
FUNCTION
9 ROTATE ORIG.
IMAGE
10 AE/TEXT
RESOLUTION
11 2-SIDED COPY
MODE
Parameters
*1 → Large (A4 width/
LETTER), 2 → Small (B5R
width/INVOICE)
*1 → Large (A4 width/
LETTER), 2 → Small (B5R
width/INVOICE)
*1 → ON, 2 → OFF
1 → Low, *2 → High
Setting codes
(factory default setting
appears in bold)
1: 10 SEC. • Auto clear time automatically returns the copy settings to the initial settings if
2: 30 SEC.
3: 60 SEC.
4: 90 SEC. • This program is used to select the period of time. Auto clear time can also be
5: 120 SEC.
6: OFF
1: 30 SEC. • This function automatically switches the machine to a low power consumption
2: 1 MIN.
3: 5 MIN.
4: 30 MIN.
5: 60 MIN.
6: 120 MIN.
7: 240 MIN.
1: ON • Use this setting to enable or disable auto power shut-off mode.
2: OFF
1: 5 MIN. • This function automatically switches the machine to a state that consumes
2: 30 MIN.
3: 60 MIN.
4: 120 MIN.
5: 240 MIN.
1: PATTERN 1 • Use this setting to select the layout pattern when two original pages are
2: PATTERN 2
1: ON • When enabled, this function offsets the position of each set of copies in the
2: OFF
1: ON • When two-sided copying is performed, this function rotates the image on the
2: OFF
1: 300dpi • This setting is used to change the copy resolution in AUTO and TEXT mode
2: 600dpi
1: HI-SPEED • If the memory fills up when two-sided copying is performed, "NORMAL" can
2: NORMAL
AL-2020/2035/2040/2050/2060 USER PROGRAM 11 - 2

4. User programs (AL-2050/2060)

1) Press the [MENU] key and then press the [OK] key.
In printer mode, the user programs are accessed by simply
pressing the [MENU] key.
2) Press the [ ] key (
that you wish to configure in the USER PROGRAM items, and
then press the [OK] key.
• You can also select a program by directly entering the pro-
gram number with the numeric keys.
3) Press the [ ] key (
ting of the selected item.
Note:
• If you mistakenly select the wrong item, press the [CLEAR] key
( ) and repeat the procedure from step 2.
• To cancel a setting for a user program, press the [MENU] key.
4) Press the [OK] key.
Your selection appears briefly and then the previous screen
appears.
Note: When "AE LEVEL ADJUST" is selected in the user programs
and the [OK] key is pressed, the automatic exposure adjust-
ment screen appears. Adjust the exposure and press the [OK]
key.
no keys are pressed for a preset period of time following the end of a copy
job.
disabled.
state if the set duration of time elapses without the machine being used when
the power is on. The power save indicator lights up, however, the keys on the
operation panel can be used. Normal operation automatically resumes when
a key on the operation panel is pressed, an original is placed, a print job is
received.
even less power than preheat mode if the set duration of time elapses without
the machine being used when the power is on. All lights except the power
save indicator go off.
To resume normal operation, press the [START] key (
Normal operation also resumes automatically when a print job is received or
scanning is begun from a computer. While in auto power shut-off mode, no
keys (except the [START] key (
copied onto a single sheet of paper.
output tray in copy mode, and each print job in printer mode.
back of the original. This is convenient when binding the copies at the top
(tablet binding).
from 600 x 300 dpi to 600 x 600 dpi (high-quality mode). Scanning is slower
when high-quality mode is used.
be selected to make copying possible. However, "NORMAL" results in a
slower copying speed. Normally "HI-SPEED" is selected to enable fast two-
sided copying.
) or [ ] key ( ) to select the item
) or [ ] key ( ) to change the set-
Explanation
).
)) can be used.