Sharp AL-2020 Service Manual page 129

Main Sub
Contents
code code
66 38 Time setting/check
(AL-2060 only)
67 50 USB receive speed
adjustment (USB1.1)
(AL-2020/2035/2040)
[Function]
Use to check the time setting.
[Operation]
1) Initial display
SELECT TO SET
1:DATE 2:TIME
∗ [Clear] key: FAX control is terminated.
2) Select 1
xxxx.xx.xx(xxx)
CHANGE? 1:YES 2:NO
"xxxx.xx.xx(xxx)" is the current value. (No
revision of display)
3) Select 1
INPUT YEAR
(4 DIGITS)____.__.__
∗ Select 2: Returns to "1) Initial display".
4) Enter the year in 4 digits.
INPUT MONTH
(1-12) 1998.__.__
5) Enter the month in 2 digits.
INPUT DAY
(1-31) 1998.01.__
6) Enter the day in 2 digits.
xxxx.xx.xx(xxx)
STORED? 1:YES 2:NO
"xxxx.xx.xx(xxx) is the entered value.
∗ Select 2: Returns to "1) Initial display".
7) Select 1
STORED
After 2sec, returns to "1) Initial display".
Used to set the limitation on the print data receive speed of USB2.0 (Full speed) port (USB port
on the machine).
→ When print images from USB2.0 (Full speed) port are disturbed, change the setting and try
again.
When this simulation is executed, the currently set code number is displayed.
Enter the code number corresponding to the adjustment value, and press [START] key to
change the setting.
Code number
1
2
3
4
AL-2020/2035/2040/2050/2060 SIMULATION, TROUBLE CODES 10 - 39
Details of function/operation
2) Select 2
"xx:xx" is the current value.
3) Select 1
∗ Select 2: Returns to "1) Initial display".
4) Enter o'clock in 2 digits.
5) Enter minute in 2 digits.
"xx:xx" is the current value.
∗ Select 2: Returns to "1) Initial display".
6) Select 1
After 2sec, returns to "1) Initial display".
Setting
FAST
NORMAL1
NORMAL2
SLOW
xx:xx
CHANGE? 1:YES 2:NO
INPUT HOUR
(0-24) __:__
INPUT MINUTE
(00-59) 01:__
xx:xx
STORED? 1:YES 2:NO
STORED
Speed
↑ Fast
↓ Slow