Sharp AL-2020 Service Manual page 14

Large item Middle item
Receive Receive
functions document
system output function
Print system
Transfer function
Telephone Main unit
functions telephone
system function
External
telephone
connection
function
Record table Report list
system
Small item Sub item
Auto reduction/ Auto reduction function When the reference line number is in the specified range.
divided receive
Divided receive
function
function
Polling receive
function (Send
request function)
Sequential send
request (Polling)
communication
Remote send
Protection function
Recording paper Recordable size
Paper feed
Recording paper size
detection
Recording paper
empty detection
Duplex receive
Number of registered
transfer destination
Registered telephone
number
Local transfer
On-hook dial
function
Manual redial Max. memory digit
function
Display digits
Pause function
Pulse/Tone select
function
Select function by
DTMF
Report output Report select
function
Recording table Number of items
auto print function
Communication Report select
report list
Print status select
AL-2020/2035/2040/2050/2060 SPECIFICATIONS 2 - 8
Specifications
When the reference line number exceeds the specified
range.
The remote machine must be provided with polling
function. Communication is allowed with an other
company machine.
Polling is made to two or more specified destinations.
Number of items of destination registration: Max. 100
items
Scanned document data in memory are sent
automatically by send request from the remote machine.
• Check by sender number
• Check by allow number
A4/8.5" x 11"/8.5" x 14"
Paper feed by tray (Excluding multi manual feed)
The recording paper length is detected. If the size differs,
a paper size error occurs.
Detected by a paper pickup error.
Available only in the duplex function support models.
Receive data are transferred to the registered station.
1 item
40 digits
Countermeasures against an error
• Paper jam
• No toner cartridge
• No toner
• During toner supply
• Toner empty
• No recording paper
Yes
50 digits
End 20 digits
Yes (Fixed to 2sec)
Yes (Set by soft switch)
Select number (1 digit) + [**] (0 - 9)
• TIMER LIST
• ACTIVITY REPORT
• TELEPHONE# LIST
• GROUP LIST
• PASSCODE LIST
• JUNK FAX# LIST
• USER PROGRAM LIST
Auto print for every 50 items of send/receive total.
• Send report list
• Receive report list
• Serial broadcast send report list
• Image memory addition
• ALWAYS PRINTS
• ERROR ONLY
• NEVER PRINTS