Print Mode - Sharp AL-2020 Service Manual

B. Print mode
Program
Program name
number
1 FORCED
OUTPUT
2 USB 2.0 MODE
SWITCH*
3 AUTO TRAY
SWITCH
* The scanning speed increases when the USB 2.0 mode is set to "HI-SPEED", however, the printing speed does not increase considerably.
Setting codes
(factory default setting
appears in bold)
1: ON • When this function is enabled, printing in printer mode will automatically
2: OFF
1: FULL-SPEED • This sets the USB 2.0 data transfer speed. To obtain the fastest speed when
2: HI-SPEED
1: ON • If the paper runs out during printing and there is paper of the same size in
2: OFF
AL-2020/2035/2040/2050/2060 USER PROGRAM 11 - 4
continue using a different size of paper if the specified size of paper runs out
in all trays. This feature does not function in copy mode.
using the USB 2.0 connector, first verify that your computer meets the
system requirements (operating system and driver), and then use this
program to change the USB 2.0 mode to "Hi-Speed". Note that the setting
should not be changed while running a TWAIN driver.
another tray, this function automatically switches to that tray (excluding the
bypass tray). The function can be disabled.
Explanation