Sharp AL-2020 Service Manual page 12

Large item Middle item
Send functions Document scan
function
Send document
information
adding function
Basic send
functions
Small item Sub item
Scan density Density select
select function
Scan resolution Selectable image
select function quality mode
Resolution select
Document table
scan (OC send)
function
Sender Sender telephone
registration/send number
function
Sender registration
name
Send header Header display content Sender number registered in sender registration/ Sender
function
Page counter Adding position
function
Adding form
Cover adding Display items
function
Send message Fixed message
adding function
Index function
Direct send
function
Memory send Send form
function
Number of items of
send reservation
Operation when
memory full
Quick online send
function
Auto resend When busy tone
function detected
When no response
(CED/ FSK signal are
not detected)
Communication error
Long document
send function
AL-2020/2035/2040/2050/2060 SPECIFICATIONS 2 - 6
Specifications
Light/Medium/Dark
Scan density
Standard: 8dot x 3.85 line/mm
Fine: 8dot x 7.7 line/mm
Super Fine: 8dot x 15.4 line/mm
Half-tone: Scan in 256 gradations
Book document scan/send function from the document
table (OC). In one send job, the send document size is
fixed.
20 digits
36 characters
name/ Send date and time/ page
Top right (The right edge)
P. XXX (Max. 999)
• Date and time
• Destination name (Max. 20 characters)
• Destination number (Max. 40 digits)
• Sender name (Max. 20 characters)
• Sender number (Max. 20 digits)
• Send quantity (3 digits)
• Send message (When send message adding function
is used)
NO MESSAGE/CONFIDENTIAL/PLS. DISTRIBUTE/
URGENT/PLS. CALL BACK/IMPORTANT
Yes (Max. 10 kinds in printable area)
Yes
• Send reservation
• Time specifying send
• Group send
• Serial broadcast
Max. 52 items (excluding redial)
Group send and broadcast are treated as one item.
• Document scan stop
• Memory full display → Job continuation check
• Job continuation: Scanned document data are sent.
• Job stop: Scanned document data are deleted.
• In either case, document is held in SPF and not
discharged.
Valid when memory mode is ON. Scan of send document
data and send are performed together.
Redial is performed according to the setting of "Number/
interval of redial when busy."
Redial is performed according to the setting of "Number/
interval of resend in communication error."
Supports up to 500mm. When this length is exceeded,
"PAPER JAM" occurs.