Pl 8.45 Tray 5 Feed Assembly (2 Of 3) - Xerox WC5632 Service Manual

PL 8.45 Tray 5 Feed Assembly (2 of 3)

Item Part Description
1 059K51080 Upper feed assembly
2 – Upper feed assembly base (P/O PL
8.45 Item 1)
3 – Nudger roll (P/O PL 8.45 Item 20)
4 – One way coupling (P/O PL 8.45
Item 20)
5 – Take away idler roller (P/O PL 8.45
Item 1)
6 130E12760 Tray 5 empty (Q07-401) /feed
sensor (Q08-105) (REP 7.13, REP
8.25)
– 130E11610 Tray 5 empty (Q07-401) /feed
sensor (Q08-105) (Alternate) (REP
7.13, REP 8.25)
7 130E12060 Stack height sensor (Q07-402)
(REP 7.14)
8 – Bearing (P/O PL 8.45 Item 1)
9 – Torsion spring (P/O PL 8.45 Item 1)
10 – Nudger roll (P/O PL 8.45 Item 20,
PL 8.45 Item 21)
11 – Upper feed assembly top cover (P/
O PL 8.45 Item 1)
12 – Feed roll (P/O PL 8.45 Item 20, PL
8.45 Item 21)
13 – Clutch (P/O PL 8.45 Item 20)
14 – Gear (38T) (P/O PL 8.45 Item 1)
15 – Roller belt (P/O PL 8.45 Item 1)
16 – Washer (P/O PL 8.45 Item 1)
17 – Torsion chute spring (P/O PL 8.45
Item 1)
18 – Housing spring (P/O PL 8.45 Item
1)
19 – Torsion nudger spring (P/O PL 8.45
Item 1)
20 – Feed roll retrofit kit (604K55110)
(NOTE 1) (W/TAG P-002)
21 – Feed roll kit (Pack of 3) (Not
Spared) (NOTE 2) (W/TAG P-002)
NOTE: 1. Kit installs reduced miss-feed (different colour) rolls
and associated parts.
NOTE: 2. Replaces the rolls installed with the feed roll retrofit
kit, PL 8.45 Item 20.
Parts Lists
PL 8.45
September 2008
5-54 WorkCentre 5687 Family