Pl 9.17 Developer Assembly (32-55 Ppm) - Xerox WC5632 Service Manual

PL 9.17 Developer Assembly (32-55
ppm)
Item Part Description
1 – Toner dispense module (P/O PL
9.17 Item 27) (REP 9.5)
2 – Developer module (P/O PL 9.17
Item 26) (NOTE 1) (REP 9.2)
3 – Retaining bracket (Not Spared)
4 – Toner cartridge (P/O PL 26.11 Item
3) (NOTE 2)
5 – Low toner sensor (Q09-310) (P/O
PL 9.17 Item 13)
6 – Registration/Developer bias
harness (Not Spared)
7 – Toner concentration sensor (Q09-
360) (P/O PL 9.17 Item 2)
8 – Not used
9 – Not used
10 – Not used
11 – Stepped washer (Not Spared)
12 – Washer (Not Spared)
13 604K16890 Out of toner sensor kit
14 – Push on fastener (P/O PL 9.17 Item
23)
15 – Spring (P/O PL 9.17 Item 23)
16 – Sleeve (P/O PL 9.17 Item 23)
17 – Toner cartridge latch (P/O PL 9.17
Item 23)
18 – Not used
19 604K24570 Trickle outlet shutter kit
20 – Shutter assembly (P/O PL 9.17
Item 19)
21 – Shutter spring (P/O PL 9.17 Item
19)
22 – Push on fastener (P/O PL 9.17 Item
19)
23 604K30560 Developer latch repair kit
24 – Developer material (P/O PL 9.17
Item 25, PL 9.17 Item 26)
25 604K35340 Developer charge kit
26 604K41360 Developer spares kit (includes
developer)
27 604K41610 Toner dispense module kit
NOTE: 1. To remove and replenish the developer material,
refer to the developer charge kit, PL 9.17 Item 25.
NOTE: 2. A waste toner bottle, PL 9.10 Item 1 is supplied
with the toner cartridges.
Parts Lists
PL 9.17
September 2008
5-58 WorkCentre 5687 Family