Pl 9.15 Developer Assembly (65-87 Ppm) - Xerox WC5632 Service Manual

PL 9.15 Developer Assembly (65-87
ppm)
Item Part Description
1 – Toner dispense module (P/O PL
9.15 Item 18) (REP 9.5)
2 – Developer module (P/O PL 9.15
Item 26) (REP 9.2)
3 – Retaining bracket (P/O PL 9.15
Item 1)
4 – Toner cartridge (P/O PL 26.11 Item
2) (NOTE 1)
5 – Low toner sensor (Q09-310) (P/O
PL 9.15 Item 13)
6 – Registration/Developer bias
harness (Not Spared)
7 – Toner concentration sensor (Q09-
360) (P/O PL 9.15 Item 2)
8 – Toner Cartridge latch (P/O PL 9.15
Item 24)
9 – Retaining plate (P/O PL 9.15 Item
2)
10 – Speed nut (P/O PL 9.15 Item 2)
11 – Sleeve (P/O PL 9.15 Item 24)
12 – Not used
13 604K16890 Out of toner sensor kit
14 – Push on fastener (P/O PL 9.15 Item
24)
15 – Spring (P/O PL 9.15 Item 24)
16 807E09950 Main drive gear (P/O PL 9.15 Item
23) (ADJ 4.1)
17 – Not used
18 604K54040 Toner dispense module kit
19 604K24570 Trickle outlet shutter kit
20 – Shutter assembly (P/O PL 9.15
Item 19)
21 – Shutter spring (P/O PL 9.15 Item
19)
22 – Push on fastener (P/O PL 9.15 Item
19)
23 – Developer/Drives interface kit (Not
Spared) (NOTE 2)
24 604K18510 Developer latch repair kit
25 – Developer material (P/O PL 9.15
Item 26, PL 9.15 Item 27)
26 604K41371 Developer spares kit (includes
developer)
27 604K35340 Developer charge kit
NOTE: 1. A waste toner bottle, PL 9.10 Item 1 is supplied
with the toner cartridges.
NOTE: 2. The main drive gear PL 9.15 Item 16 and
developer drive gear/pulley PL 4.12 Item 17, must always be
replaced as a pair.
WorkCentre 5687 Family
September 2008
5-57
Parts Lists
PL 9.15