Auto Restart Control; Indication Panel - Panasonic CS-VE9NKE Service Manual

12.7.3 Sleep Timer

Sleep operation is performed according to the delay OFF time (0.5, 1, 2, 3, 5, 7 or 9 hr) and provide comfortable
environment by shifting set temperature.
Temperature Shift
Cooling
Set temperature (°C)
Heating
Stop condition
- Reached delay time.
- Pressed sleep button to cancel.
- Unit is OFF.

12.8 Auto Restart Control


When the power supply is cut off during the operation of air conditioner, the compressor will re-operate within
three to four minutes (there are 10 patterns between 2 minutes 58 seconds and 3 minutes 52 seconds to be
selected randomly) after power supply resumes.

This type of control is not applicable during ON/OFF Timer setting.

This control can be omitted by open the circuit of JP1 at indoor unit printed circuit board.
12.9

Indication Panel

LED
Color
Light ON
Light OFF
Note:

If POWER LED is blinking, the possible operation of the unit are Hot Start, during Deice operation, operation
mode judgment, or ON timer sampling.

If Timer LED is blinking, there is an abnormality operation occurs.
Heating
A 2hr
B *5am
* According to remote control clock
Status 1 Status 2
0 +1
0 -1
POWER TIMER
Green Orange
Operation ON Timer Setting ON
Operation OFF Timer Setting OFF
Cooling, Dry
3hr
*4am
Status 3 Status 4
+2 +3
-2 -3
+8/10°C HEAT nanoe-G
Green Blue
+8/10°C HEAT nanoe-G
Mode ON ON
+8/10°C HEAT nanoe-G
Mode OFF OFF
42
ECONAVI
Green
ECONAVI ON
ECONAVI OFF