Connect The Cable To The Indoor Unit - Panasonic CS-VE9NKE Service Manual

11.2.4 Connect the Cable to the Indoor Unit

1 The inside and outside connection cable can be connected without removing the front grille.
2 Connection cable between indoor unit and outdoor unit shall be approved polychloroprene sheathed 4 x 1.5
2
mm flexible cord, type designation 245 IEC 57 or heavier cord.
3 Bind all the indoor and outdoor connection cable with tape and route the connection cable via the
escapement.
4 Remove the tapes and connect the connection cable between indoor unit and outdoor unit according to the
diagram below.
Note:

Secure the connection cable onto the control board with the holder (clamper).

Ensure the colour of wires of outdoor unit and the terminal Nos. are the same to the indoor's respectively.

Earth wire shall be Yellow/Green (Y/G) in colour and longer than other AC wires for safety reason.
28