Comfort Adjustments - Pride Mobility Jet 12 Owner's Manual

V I . C O M F O R T
After you have used your Jet 12 for an extended period of time, you may find the need to make some
adjustments to increase your comfort. You can change the armrest height or change the swing-away footrest
length.
WARNING! If your Jet 12 was configured at your authroized Pride provider or service center,
please consult your healthcare professional before changing the seat position or making any
other adjustment. Some adjustments may degrade your power chair’s performance and safety by
changing its center of gravity.
ARMREST HEIGHT
You can change the armrest height in 1-in. increments. There
are three different heights.
To change the armrest height:
1. Rotate the armrest lever down to release the armrest. See
figure 29.
2. Move the armrest up or down.
3. Rotate the armrest lever up to lock the armrest.
SWING-AWAY FOOTREST LENGTH
You can change the footrest length in 1-in. increments.
To change the footrest length:
1. Use a 13-mm wrench to loosen the footrest nuts. See
figure 30.
2. Use a 4-mm hex wrench to remove the cap screws.
3. Slide the footrest up or down to the desired length.
4. Install the caps screws.
5. Tighten the 13-mm nut.
6. Repeat for the other side.
Jet12/RevC/Feb03
A D J U S T M E N T S
Figure 29. Armrest Height Adjustment
4 MM CAP
SCREWS
13 MM NUT
Figure 30. Swing-away Footrest
www.pridemobility.com
ROTATE UP TO CHANGE ARMREST HEIGHT.
23