There are seven Jet 12 components: power
base; seatback; controller box; footrests (2);
battery boxes (2). See figure 3. If any of the
components are missing or damaged, contact
your authorized Pride provider immediately.
To assemble your Jet 12, follow these
instructions:
PUSH DOWN SEAT RAILS TO
EXPAND POWERBASE.
Figure 4. Press down on seat rails to open
powerbase partially.
FRONT SEATBACK PINS
Figure 6. Install front and rear seatback pins
(seatback removed for clarity).
16
I V .
A S S E M B L Y
POWER BASE
SEATBACK
www.pridemobility.com
CONTROLLER BOX
Figure 3. The Jet 12 Components
PLACE SEAT BACK INTO
POWERBASE.
Figure 5. Install seatback into rear seat
holes on powerbase.
Figure 7. Lock armrests.
BATTERY BOXES (2)
FOOTRESTS (2)
Jet12/RevC/Feb03