Comfort Adjustments - Pride Mobility Celebrity X Owners Mnaual

V I I .
TILLER ANGLE ADJUSTMENT
WARNING! Remove the key from the key
switch before adjusting the tiller or the
seat. Never attempt to adjust the tiller or
the seat while the scooter is in motion.
Your scooter is equipped with an adjustable pivoting tiller.
1. While supporting the tiller, turn the tiller adjustment knob
anticlockwise to loosen the tiller. See figure 14.
2. Move the tiller to a comfortable position.
3. Turn the tiller adjustment knob clockwise to secure the
tiller in position.
NOTE: In order to fully lower the tiller, you must first
remove the seat. Remove the seat by pulling it straight
up and off of the scooter.
SEAT ROTATION
The seat rotation lever will lock the seat into several positions.
1. Push forward on the seat rotation lever to unlock the
seat. See figure 15.
2. Rotate the seat to the desired position.
3. Release the lever to lock the seat into place.
FRONT-TO-BACK SEAT ADJUSTMENT
You can reposition the seat forward or rearward to ad-
just the distance between the seat and the tiller. See
figure 15.
1. Move the seat sliding lever outward.
2. While holding the lever out, slide the seat forward or rear-
ward.
3. Release the seat sliding lever once the seat is in the de-
sired position.
ARMREST WIDTH ADJUSTMENT
The armrest width can be adjusted inward or outward.
1. Loosen the armrest adjustment knobs. See figure 16.
2. Remove the detent pins.
3. Slide the armrests in or out to the desired width.
4. Align the adjustment holes on the seat frame and armrest,
then reinsert the detent pins.
5. Tighten the armrest adjustment knobs as required.
NOTE: Pivot the armrests upward to aid in getting onto
and off of your scooter.
30
C O M F O R T
www.pridemobility.com
A D J U S T M E N T S
Figure 14. Tiller Adjustment
SEAT SLIDING LEVER
Figure 15. Seat Adjustment Levers
ARMREST ADJUSTMENT KNOBS
Figure 16. Armrest Width Adjustment
TILLER ADJUSTMENT
KNOB
SEAT ROTATION LEVER
DETENT PINS
Celebrity X