BodyCraft 302 Instruction Manual page 8

STEP 3
1.Attach the Press Arm Selector (11) to the Top Frame (3) by aligning the holes and
inserting the 1" Axle (34). Lock into place with the pre-installed 3/8" X 1/2" Set
Screw (76).
2.Attach the Press Arm (12) to the Press Arm Selector (11) by aligning holes and
inserting the 1" Pivot Axle (34). Lock into place with pre-installed Set Screw (76).
Insert two 50mm Sq. Plugs (54) into the Press Arm (12) and four 50mm Sq. Plugs
(54) into the Press Arm Selector (11).
11
54
12
54
Assemble Press Arm
54
76
76
34
76
34
54
54
3
7