Table of Contents
Advertisement
1. Connect extension cord to the male plug on the
snow thrower then connect extension cord to proper
AC power source.
2. Press the start switch button in fully and hold in.
The start switch button is located on the switch
housing (N).
3. To start, while holding the start switch button in,
pull the handle bar (P) toward you until it touches
the handle. The start switch button must be pressed
in and held before pulling the handle. Once the
snow thrower starts, release the start switch button
4.To stop, release the handle bar (P) and allow the
handle bar to return to the OFF position.
3
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DB5023 and is the answer not in the manual?