Page 1
MODEL #DB5006 9 AMP ELECTRIC SNOW THROWER ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-791-9458.
WARNING Safety Information ........................... 5 specifications detailed in this manual. Before inserting the plug into the socket, verify that the snow MODEL #DB5006 the main handle (B). Support(K), making sure the nut is fully inserted. into the hole in the handle support (K) and tighten it product.
SAFETY INFORMATION Body position - Maintain proper footing and balance at all times. Place heels firmly on the ground and tightly grasp the handle bar. Watch for uneven surfaces and do not overreach. In case you fall or collide with the snow thrower, inspect the unit for damage. When stepping backwards, be careful to avoid obstacles beneath your feet or behind you to avoid falling.
SAFETY INFORMATION PRODUCT LABELS WARNING - Read, understand and follow all safety labels and markings on the unit. CAUTION Inspect wiring, which, if damaged during shipping, may cause serious bodily injury during equipment use. If any damage is seen or suspected, do not assemble. Instead, contact our customer service department at 1-800-791-9458.
ASSEMBLY INSTRUCTIONS 1. Align the slot on the main pole (G) with the track on the main handle (B). 2. Turn around the main handle and insert the main pole (G) into the main handle (B), making sure that the tab on the main handle (B) is inserted into the hole on the main pole (G).
Page 9
WARNING Safety Information ........................... 5 specifications detailed in this manual. Before inserting the plug into the socket, verify that the snow MODEL #DB5006 the main handle (B). Support(K), making sure the nut is fully inserted. into the hole in the handle support (K) and tighten it product.
Page 10
WARNING Safety Information ........................... 5 specifications detailed in this manual. Before inserting the plug into the socket, verify that the snow MODEL #DB5006 the main handle (B). Support(K), making sure the nut is fully inserted. into the hole in the handle support (K) and tighten it product.
OPERATING INSTRUCTIONS Note: Before using this machine, make sure that the power source you will use complies with the specifications detailed in this manual. Before inserting the plug into the socket, verify that the snow thrower’s auger and scraper are firmly attached with screws. Perform a test run to ensure that the rotor turns freely.
Page 12
OPERATING INSTRUCTIONS WARNING Damaged electrical cords present risk of fire, electric shock, and serious bodily injury. Before operating the snow thrower, carefully examine the electrical cord. If the cord is damaged, do not use the snow thrower. Replace or repair the damaged cord immediately. If you need assistance, contact our customer service department at 1-800-791-9458.
Page 13
OPERATING INSTRUCTIONS MOVING THE MACHINE AND PLOWING THE SNOW WARNING Foreign objects, such as rocks, broken glass, nails, wire, or string, can be picked up and thrown by the snow thrower, causing serious personal injury. Remove all foreign objects from the area to be plowed before operating the snow thrower. Keep the area of operation free of foreign objects that can become thrown by the rotor blades.
CARE AND MAINTENANCE WARNING Make sure to turn off the switch and disconnect the extension cord before performing any maintenance task on your snow thrower. Run the snow thrower for a few minutes to melt away any snow on the snow thrower. Turn the snow thrower’s power off.