Konica Minolta bizhub 750 User Manual page 491

12
Parameter
Scanner
Adjust-
ment
ADF Centering
!
Detail
When PK-505 and ZU-602 are installed, adjustments can be made using
both the "Punch Adjustment" and "Z-Fold Position Adjustment" param-
eters. Contact your technical representative.
List/Counter
Parameter
Management List
Paper Size/Type Counter
Reset Setting
Parameter
System Auto Reset
12-36
Description
Leading The starting scanning position (document feed direction) of the doc-
Edge Ad- ument can be adjusted. For details on making this adjustment, con-
justment tact your technical representative.
Centering The starting scanning position (transverse document feed direction)
of the document can be adjusted. For details on making this adjust-
ment, contact your technical representative.
Vertical If the copy image is distorted (stretched or compressed), the zoom
Adjust- ratio in the document feed direction for the scanner can be adjusted.
ment For details on making this adjustment, contact your technical repre-
sentative.
If the center position cannot be automatically adjusted in the trans-
verse document feed direction, it can be adjusted manually. For de-
tails on making this adjustment, contact your technical
representative.
Job Settings List
Description
Specify the desired length of time until
the automatic system reset operation is
performed.
• Priority Mode:
Select the setting for the mode that
the machine enters when the auto-
matic system reset operation is per-
formed.
• System Auto Reset Time:
Specify the setting for the desired
length of time until the automatic sys-
tem reset operation is performed.
Settings (Default set-
tings are underlined.)
Description
The machine settings can be printed. In ad-
dition, single-sided or double-sided printing
can be selected.
Store up to 9 combinations of paper sizes
and paper types to be counted.
Settings (Default set-
tings are underlined.)
Priority mode:
Copy/ Scan
System Auto Reset
Time:
OFF/ 1 to 9 minutes:
1 minute
bizhub 750/600
Utility