Konica Minolta bizhub 750 User Manual page 523

12
7
Touch [Test Copy].
The Test Copy screen appears.
8
Press the [Start] key.
The sample copy is printed.
9
Touch [Close].
The Punch Unit Hor. Position screen appears again.
10
Check the punch positions in the sample copy.
11
If the desire print results are not achieved, change the adjustment val-
ue.
– If the punch positions are too far on the right side of the paper,
touch [+] (between 0.1 mm and 5.0 mm).
12-68
Utility
bizhub 750/600