Konica Minolta bizhub 750 User Manual page 492

Copy operations
Hide thumbs Also See for bizhub 750:
Table of Contents

Advertisement

Utility
Parameter
Auto Reset
Job
Reset
System Auto Reset for
Proof Copy
Reminder
If "System Auto Reset" is set to "OFF", the Enlarge Display mode is not
canceled. In addition, user authentication and account track are can-
celed after 1 minute even if "System Auto Reset" is set to "OFF".
This machine detects that the user has changed when the optional key
counter has been removed, when the magnetic card has been removed
from the optional data controller, or when the [Access] key is pressed af-
ter entering user authentication or account track information.
bizhub 750/600
Description
Select the setting for the desired length
of time until the automatic panel reset
operation is performed for each mode.
When ac-
Select whether or not the settings are re-
count is
set when the user has changed.
changed
This machine detects that the user has
changed when the optional key counter
has been removed or when the [Access]
key is pressed after entering user au-
thentication and account track informa-
tion.
When orig-
Select whether or not the settings are re-
inal is set
set when a document is loaded into the
on ADF
ADF.
When Next
Staple Setting:
Job is se-
Select whether the same Staple setting
lected
from the previous job is set or the setting
is canceled when that job begins and the
settings for the next job can be speci-
fied.
Original Set/Bind Direction:
Select whether the same Original Direc-
tion and Margin settings from the previ-
ous job are set or the settings are
canceled when that job begins and the
settings for the next job can be speci-
fied.
Reset Data After Job:
Select whether the same settings for a
scan operation from the previous job are
set or the settings are canceled when
that job is completed and the settings for
the next job can be specified. (However,
even if "OFF" is selected, the destination
is cleared.)
Select whether or not the automatic sys-
tem reset operation is performed when
the proof copy operation is stopped.
12
Settings (Default set-
tings are underlined.)
Copy: OFF/ 1 to 9 min-
utes: 1 minute
Scan: OFF/ 1 to 9 min-
utes: 1 minute
Reset/ Do Not Reset
Reset/ Do Not Reset
ON/ OFF
ON/ OFF
ON/ OFF
ON/ OFF
12-37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bizhub 600

Table of Contents