Konica Minolta bizhub 750 User Manual page 121

3
8
After all original pages have been scanned, touch [Finish].
– When the "Separate Scan" setting is selected to output the job as
a single copy job, touch [Yes] in the screen requesting confirmation
that the scanning is complete. Otherwise, touch [No] to return to
step 6.
9
Press the [Start] key.
– If the "Print Setting for Separate Scan" parameter is set to "Batch
Print", touch [Print] or press the [Start] key.
– If the "Print Setting for Separate Scan" parameter is set to "Batch
Print", the copy settings can be changed. To change the copy set-
tings, touch [Change Setting], and then touch [OK] after changing
the settings as desired. Otherwise, touch [Cancel Change] to can-
cel the changes to the settings.
3-16
Basic Copy Operations
bizhub 750/600