Konica Minolta bizhub 750 User Manual page 281

Copy operations
Hide thumbs Also See for bizhub 750:
Table of Contents

Advertisement

7
4
Specify the X and Y sides of the paper, and then touch [Store].
Touch [X], touch [↔] to switch between the integer and the fraction
and then touch [–] and [+] to type in the length of side X. (5-1/2 in.
to 18 in.)
Touch [Y], touch [↔] to switch between the integer and the fraction
and then touch [–] and [+] to type in the length of side Y. (3-15/16
in. to 12-5/16 in.)
Check the illustration in the screen for the sides that are considered
as X and Y.
If a decimal value is displayed in the screen, use the keypad to type
in the length. For details on switching between decimal and fraction
values, refer to "System Setting" on page 12-19.
If a decimal value is displayed in the screen and the specified value
is outside the allowable range, the message "Input Error" appears.
Type a value within the allowable range. If the value was incorrectly
entered, press the [C] (clear) key to erase the value, and then spec-
ify the correct value.
5
Touch the memory key where the paper size is to be stored.
7-16
Copy Paper/Original
bizhub 750/600

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bizhub 600

Table of Contents