Error Code On The Status Menu - Epson WF-R5690 User Manual

User's Guide
Related Information
"Contacting Epson Support" on page 200
&
"Installing Applications" on page 142
&
"Updating Applications and Firmware" on page 145
&

Error Code on the Status Menu

If a job does not complete successfully, check the error code displayed on the history of each job. You can check the
error code by pressing the button, and then selecting Job History. See the following table to find the problem and
its solution.
Code Problem
001 The product was turned off by a power failure.
101 The memory is full.
102 Collated printing has failed due to a lack of available
memory.
103 Printing quality has been lowered due to a lack of
available memory.
104 Reverse printing has failed due to a lack of available
memory.
Solving Problems
Solution
-
Try the methods below to reduce the size of the print
job.
❏ Lower the print quality and the resolution.
❏ Change the format setting.
❏ Reduce the number of images, letters or fonts
used in the print job.
❏ Select Setup > System Administration > Clear
Internal Memory Data > Clear Font and Macro,
and then clear the fonts and the macros that you
have downloaded.
❏ Try the methods below to reduce the size of the
print job. If you do not want to use these
methods, try printing one copy at a time.
❏ Lower the print quality and the resolution.
❏ Change the format setting.
❏ Reduce the number of images, letters or fonts
used in the print job.
If you do not want to lower the print quality, try the
following methods to reduce the size of the print job.
❏ Change the format setting.
❏ Reduce the number of images, letters or fonts
used in the print job.
❏ Select Setup > System Administration > Clear
Internal Memory Data > Clear Font and Macro,
and then clear the fonts and the macros that you
have downloaded.
❏ If you want to print in reverse, try the following
methods to reduce the size of the print job.
❏ Lower the print quality and the resolution.
❏ Change the format setting.
❏ Reduce the number of images, letters or fonts
used in the print job.
148