Epson WF-R5690 Start Here

WF-R5690
Start Here
1
Unpack
Warning: The product is heavy and should be lifted and moved by two people.
2
Install ink supply units (ink packs)
Place the ink pack on the
holder.
3
Turn on and configure
Caution: Do not connect to your computer yet.
4

Load paper

French control
panel stickers
Unpack the black ink pack.
Press in the handle.
LTR
Read these instructions before using your product.
Shake 20 times.
Press to release the
ink pack holder.
Follow the same steps to install
the 3 color ink packs on the
other side of the printer.
Select your language,
country, date, and time.
Note: You can change
these settings later using the
product's control panel. For
more information, see the
online User's Guide.
Select the paper settings on the product's control panel.
English
Note:
• The printer is designed for use with Epson
ink packs only, not third-party ink.
• The ink packs included with the product
are designed for product setup and not for
resale. After some ink is used for priming,
the rest is available for printing.
Ink priming begins.
Caution: Don't open the front
cover or ink pack covers or turn
off the product while it is priming.
Otherwise, you'll waste ink.
®