To Replace (Install) The Ink Cartridge - Hasler WJ20 Operating Manual

HASLER
To Replace The Ink Cartridge
The same process is used to install a new ink cartridge
except there is no "old" ink cartridge to remove.
Notes:
•
The ink charging process may take a short while to
complete, during this time the machine may produce
some mechanical sounds, this is normal.
•
Once installed, do not open the blue latch again until you
need to fit a new cartridge.
•
If the ink cartridge is not installed properly the machine will
not work.
From Ready mode, press
and scroll (< >) to the
Cartridge display:
Press to confirm.
Next, scroll (< >) to Remove:
Continued on the next page.
06/2003
Print Quality
WJ20
Section 9
< CARTRIDGE
CARTRIDGE
< REMOVE
>
>
Page 9 - 3