Table of Contents
Advertisement
HASLER
To Startup And Process An Item
Set the switch on the power supply outlet to the OFF position,
connect the power unit to the power supply outlet and the
other end to the D.C. input socket () at the back of the
machine.
Now set the switch on the power outlet socket to ON.
When the machine is ready, the following displays will be
observed:
Followed by:
To unlock the machine,
press
(or any key) and enter
the User PIN.
Example: Enter PIN 1 2 3 4
Notes:
If using the machine for the first time, the Factory Default PIN
is set to 1 2 3 4.
If an incorrect PIN is entered, check PIN for accuracy, press
and try again.
If WARNING PENDING CREDIT is displayed press
clear the message.
Page 1 - 2
Getting Started
WELCOME TO WJ20
PLEASE WAIT
LOCKED
09:01
12/12/02
WJ20
Section 1
LOCKED
_ _ _ _
READY
12/12/02
$0.00
to
06/2003
Advertisement
Table of Contents
