Table of Contents
Advertisement
2 Product Overview
No.
Component
6
Booklet output tray
(Only available when the
Finisher D4 with Booklet
(optional) is installed.)
7
Booklet output tray button
(Only available when the
Finisher D4 with Booklet
(optional) is installed.)
8
Right cover
9
Staple cartridges for booklet
(Only available when the
Finisher D4 with Booklet
(optional) is installed.)
2
10
Staple waste container
11
Staple cartridge
12
Hole punch waste container
13
Tri-Fold output tray
(Only available when the D4
Folder Unit (optional) is
installed.)
14
Tri-Fold output tray button
(Only available when the D4
Folder Unit (optional) is
installed.)
15
Left cover
Note
18
Outputs are delivered here when [Fold Only] or [Fold & Staple] is
selected.
Press this button to move booklets that have been delivered to a
position where they can be removed.
Open this cover to clear paper jams; replace staples or clear jammed
staples; or remove scraps from the hole punch waste container.
Two staple cartridges for booklet. Remove these cartridges when
replacing them with new ones, or when clearing staple jams.
Collects scraps from the stapler. Remove this cartridge to replace the
staple waste container.
Contains staples. Take this cartridge out when replacing the cartridge
with a new one, or when clearing staple jams.
Collects scraps from the puncher. Remove this when discarding
scraps.
Outputs are delivered here when [C Fold] or [Z Fold] is selected in
[Folding].
Press this button to open the Tri-Fold output tray.
Open this cover to access the inside of the machine to clear paper
jams.
• The Finisher D4 and Finisher D4 with Booklet are optional. In this manual, the Finisher D4
and Finisher D4 with Booklet are both referred to as the "Finisher".
Function
Advertisement
Table of Contents
