6 Problem Solving
When the Lamp E1 or E2 is Lit
1
Make sure that the machine is not in
operation, and press the button on the left
cover of the Trimmer unit to open the cover.
2
Remove the jammed paper.
3
If you cannot remove the paper in step 2,
open the finisher right door.
6
4
Turn the knob [4a] to the right, and then
remove the jammed paper.
5
Close the left cover of the Trimmer unit.
6
If you opened the finisher right door in step 3, close the finisher right door.
Note
150
• A message will be displayed and the machine will not operate if the finisher right door is
even slightly open.