Table of Contents
Advertisement
Symptom
The entire output
When Tray 5 (Bypass) is
is faint.
used, the size and type of
the loaded paper are
different from the settings
on the print driver.
Two or more sheets may be
fed simultaneously.
Paper becomes
The paper is unsuitable.
wrinkled.
Paper has been added to
the paper loaded.
The paper is damp.
Text is blurred.
The paper is unsuitable.
Paper has been added to
the paper loaded.
The paper is damp.
White patches
The drum cartridge has
appear vertically.
deteriorated or is damaged.
No toner remains in the
toner cartridge.
Paper feed direction
Text or images
The paper guides in the
are printed at an
paper tray are not set in the
angle.
correct positions.
Cause
Load paper of the correct type and size
into Tray 5 (Bypass).
Refer to "Loading Paper in Tray 5 (Bypass)"
(P.69).
Fan the paper well and load it again.
Refer to "Loading Paper" (P.66).
Replace the paper with a new one.
Refer to "Loading Paper" (P.66).
Replace the paper with a new one.
Refer to "Loading Paper" (P.66).
Contact our Customer Support Center.
Replace the toner cartridge with a new
one.
Refer to "Replacing the Toner Cartridge"
(P.91).
Adjust the horizontal and vertical paper
guides to the correct positions.
Refer to "Loading Paper" (P.66).
Image Quality Trouble
Remedy
109
6
Advertisement
Table of Contents
