Assigning Multiple Knobs To Control Volume In Different Zones - Kurzweil PC3LE6 Musician's Manual

Assigning Multiple Knobs To Control Volume In Different
Zones
You can assign a different Knob to each Zone in a Setup so that you can easily adjust the volume
of each Zone. For example, let's edit the setup 38 Jazz Bass/Piano, which has a bass program on
Zone 1 and a piano program on Zone 2.
1.
2.
3.
If you are not already in Setup mode, press the Exit button until you reach the ProgramMode page,
then press the Setup mode button, located with the mode buttons to the left of the display. This
will bring you to the Setup mode main page. Next, press 38 and then Enter on the alphanumeric
pad to select the setup 38 Jazz Bass/Piano (see below.) You can also select setups by using the - / +
buttons or Alpha Wheel.
Next, with the setup 38 Jazz Bass/Piano selected in setup mode, press the Edit button on the front
panel. This will bring you to the CH/PROG page of the setup editor (see below.)
Step 3
From the CH/PROG page, press the CTRLS soft button on the bottom of the screen (see above.)
This brings you to the Controllers page where you can view and assign physical controllers to
destinations for the current Zone.

Assigning Multiple Knobs To Control Volume In Different Zones

Tutorials: Setup Mode
13-13